This instruction sheet is one way to install XTREME SEAL ®.
Assemble your canvas in the way you always have, place XTREME SEAL ® under the binding edge on the inside of the finished surface, large bead towards the back and the small lip about 1/8 inch to 1/4 inch revealed. Place the material and XTREME SEAL ® under sewing machine, canvas side up. Sew through binding and XTREME SEAL ® and align with crease creating an even tighter seal for better contact between your canvas and the boat. See the drawing below.
Thank you, for using XTREME SEAL ®. If you have any questions, please contact us.